Lenovo laptop making buzzing sound bottom left?
My laptop is making a buzzing sound on the bottom left. It's a lenovo. Is this normal? Runs on windows 7.
Laptops & Notebooks - 1 Answers
Random Answers, Critics, Comments, Opinions :
1 :
I'm using a Lenovo too.. Usually, a sound on the Bottom Left is the Cooling Fan. This might be due to the stability of the Laptop. Make sure the table is really flat and it's Stable. But in some cases, This would be a factory defect or Laptop Age. Go to the lenovo Forums Page. hope this helps...
Read more discussions:
Saturday, August 1, 2009
Tuesday, July 28, 2009
How to set resolution of my Lenovo laptop?
how to set resolution of my Lenovo laptop?
i recently installed window xp sp-2 on my Lenovo laptop but even after adjusting resolution of my laptop to 1024 X 768 pixels my icons and text is not displayed in correct manner. All the icons and every message box along with text has bigger size than usual which looks very awkward. Pls tell me how to get rid of this problem?
Laptops & Notebooks - 2 Answers
Random Answers, Critics, Comments, Opinions :
1 :
Hi all, I am running Lenny on an IBM Thinkpad X60 with a docking station, which is attached to a 19" Lenovo L191 screen. I have an Intel Mobile 945GM graphics card and I'm using the "intel" driver. The native resolution of my laptop screen is 1024x768, while the native resolution of my LCD screen is 1280x1024. My problem is that the resolution on my external LCD screen is is always detected at 1024x768? The monitor is always detected properly (1280x1024) when I use Etch. I can get xorg to switch the resolution to 1280x1024 by running this command "xrandr --output VGA --auto" after I login. But then I need to logout and back in again so the fonts look right. Can someone help me fix this or is it a problem with xorg not detecting my monitor correctly? Here's a snip of my xorg.conf if it will help: ----------------------------Snip--------------------------- Section "Device" Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 30-65 VertRefresh 50-75 EndSection Section "Screen" Identifier "Default Screen" Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Monitor "Generic Monitor" DefaultDepth 24 EndSection
2 :
Go to the Display Properties ( I assume you know how to find those), Go to Settings, Click 'Advanced', and 'General'. There you see a DPI setting, which is probably set to 120 DPI or custom. Switch it back to 96 DPI, and you are good to go.
Read more discussions:
i recently installed window xp sp-2 on my Lenovo laptop but even after adjusting resolution of my laptop to 1024 X 768 pixels my icons and text is not displayed in correct manner. All the icons and every message box along with text has bigger size than usual which looks very awkward. Pls tell me how to get rid of this problem?
Laptops & Notebooks - 2 Answers
Random Answers, Critics, Comments, Opinions :
1 :
Hi all, I am running Lenny on an IBM Thinkpad X60 with a docking station, which is attached to a 19" Lenovo L191 screen. I have an Intel Mobile 945GM graphics card and I'm using the "intel" driver. The native resolution of my laptop screen is 1024x768, while the native resolution of my LCD screen is 1280x1024. My problem is that the resolution on my external LCD screen is is always detected at 1024x768? The monitor is always detected properly (1280x1024) when I use Etch. I can get xorg to switch the resolution to 1280x1024 by running this command "xrandr --output VGA --auto" after I login. But then I need to logout and back in again so the fonts look right. Can someone help me fix this or is it a problem with xorg not detecting my monitor correctly? Here's a snip of my xorg.conf if it will help: ----------------------------Snip--------------------------- Section "Device" Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 30-65 VertRefresh 50-75 EndSection Section "Screen" Identifier "Default Screen" Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller" Monitor "Generic Monitor" DefaultDepth 24 EndSection
2 :
Go to the Display Properties ( I assume you know how to find those), Go to Settings, Click 'Advanced', and 'General'. There you see a DPI setting, which is probably set to 120 DPI or custom. Switch it back to 96 DPI, and you are good to go.
Read more discussions:
Tuesday, July 14, 2009
How to restore my lenovo laptop to factory settings w/out cd.?
How to restore my lenovo laptop to factory settings w/out cd.?
I need help.. can someone tellme if there is a way to do this with a lenovo laptop? i tried pressing f11 at start up but it was very confusing and got me no where. what or where is the 'lenovo care button'?
Laptops & Notebooks - 3 Answers
Random Answers, Critics, Comments, Opinions :
1 :
Try depressing the "lenovo care"-button at startup.
2 :
You can try F11 or CTRL + F11 or [Lenovo Care] + F11 or just the Lenovo Care button. Do this while you see the Lenovo splash screen. If you can boot into Windows, there may be a recovery program in the start menu or accessible from the Lenovo Care button. Look for an option with Factory Settings or Format in the title.
3 :
If your Laptop came with a different partition containing Factory Restoring Files, You should try Help and Support option and search 'System restore' there. If you are using Windows Vista/7 you can easily find this option in start search .You should make sure that you haven't deleted or did any changes to those files as well.
Read more discussions:
I need help.. can someone tellme if there is a way to do this with a lenovo laptop? i tried pressing f11 at start up but it was very confusing and got me no where. what or where is the 'lenovo care button'?
Laptops & Notebooks - 3 Answers
Random Answers, Critics, Comments, Opinions :
1 :
Try depressing the "lenovo care"-button at startup.
2 :
You can try F11 or CTRL + F11 or [Lenovo Care] + F11 or just the Lenovo Care button. Do this while you see the Lenovo splash screen. If you can boot into Windows, there may be a recovery program in the start menu or accessible from the Lenovo Care button. Look for an option with Factory Settings or Format in the title.
3 :
If your Laptop came with a different partition containing Factory Restoring Files, You should try Help and Support option and search 'System restore' there. If you are using Windows Vista/7 you can easily find this option in start search .You should make sure that you haven't deleted or did any changes to those files as well.
Read more discussions:
Subscribe to:
Posts (Atom)